|
Home
About Us
Contact Us
Products
WHAT'S NEW
Our History
| |
SPECIFICATIONS:
2-AXLE
·
3-AXLE
| ALUMINUM
2-AXLE
PONY DUMP |
| |
| Dimensions |
| Length |
- 28'0" |
| Width |
- 96" |
| Height |
- 120" |
| Capacity |
- 22 cubic yards |
| Weight |
- 12,750 lbs |
| |
| Box Construction: |
| Length |
- 15'0" |
| Side Height |
- 48" |
| Floor |
- 1/4" 5083 H-321 aluminum plate |
| Sides |
- 3/16" 5083 H-321 aluminum plate |
| Top Rail |
- 6" SCH40 aluminum pipe |
| Boards |
- 2" x 12" |
| Tailgate |
- 1/4" aluminum plate |
| |
- Top greasable hinges, air locks and spread chains |
| Ladder |
- Up the front at driver's side |
| Tarp |
- Manual swing over mesh with ground control crank |
| Hoist |
- 145-7-4 |
| Hinge |
- 2 1/4" pin c/w four (4) greasable bushings (41" O.D.) |
| |
| Frame Construction: |
| Beams |
- Fabricate high tensile I-beams |
| Axle |
- 22,500 lb, parallel spindle, 77 1/2" track |
| Wheels |
- 10 stud steel |
| Brakes |
- 16.5 Q-brake, CM-20, non-asbestos lining |
| ABS |
- 2S/1M |
| Suspension |
- 30,000 lb air ride @ 72" spread tandem |
| Dolly Leg |
- Two speed, crank on driver's side |
| Eye |
- Pintle eye @ 26" high |
| Chain |
- 5/8" safety chain c/w hooks |
| Tires |
- 11R 22.5 16 ply radials |
| Rims |
- 8.25 x 22.5, 10 hole, hub pilot, steel |
| |
| Miscellaneous: |
| Lights |
- LED c/w side signal |
| Flaps |
- Four (4) supplied across rear |
| Paint |
- Frame sandblasted, primed, and painted one (1) colour |
| |
- Aluminum washed natural |
| |
|
| Options: |
| Aluminum Square Pony |
|
| Steel Square Pony |
|
| Steel U-Body Pony |
|
| STEEL
3-AXLE PONY DUMP |
| |
|
| Dimensions: |
| Length |
- Approximately 39'6" |
| Width |
- 102" |
| Height |
- 124" |
| Capacity |
- 24 cubic yards |
| Weight |
- Approximately 6,900 kg |
| |
|
| Box Construction: |
| Length |
- 17'0" |
| Body |
- 1/8" T1 plate sides with 3/16" T1 plate floor |
| Gate |
- 1/8" T1 plate c/w air locks and spread chains |
| Ladders |
- Front roadside |
| Hoist |
- 156-6-4 |
| Tarp |
- Air swing over mesh |
| Hinges |
- 2 1/4" pin c/w greasable hinges |
| |
|
| Frame Construction: |
| Beams |
- Fabricated high tensile I-beams w/100,000 yield flanges
and 1/4" web |
| Axles |
- 22,500 lbs, 71 1/2" track |
| Wheels |
- 10 stud steel |
| Brakes |
- 16.5 x 7 x 3/4" Q-brake, CM-20, non-asbestos lining,
auto slacks |
| Suspension |
- 72" spread, 30,000 lbs. |
| Lift |
- 100" ahead, 25,000 lbs. |
| Stand |
- MK-V two speed |
| Eye |
- Pintle eye @ 26" high |
| Chain |
- 3/4" safety chain c/w hooks |
| Tires |
- 11R 22.5 16 ply radials |
| Rims |
- 8.25 x 22.5 10 hole hub pilot |
| |
|
| Miscellaneous: |
| Lights |
- LED c/w side signal |
| Flaps |
- Four (4) across the rear |
| Fenders |
- 1/4" fender over lift axle |
| Paint |
- Sandblasted, primed, and painted one (1) colour |
| |
|
| Options: |
| Aluminum Pony |
|
| Aluminum Rims |
|
| UHMW Liner |
|
PHOTO GALLERY:
|
|
|
|
38'6" 3-AXLE PONY
|
|
|
|
39'6" 3-AXLE PONY
|
|
|
|
40'0" 3-AXLE PONY
|
|
|
|
|
|
17'0" 3-AXLE PONY
|
|
|
(TOP OF PAGE)
|
PONY
DUMPS
